
6564
MOVING HEADS
ROBIN
®
Cyclone
TM
This innovative effects moving head product has an integrated fan in
the centre of the head surrounded by a ring of 24x high powered
RGBW multichip LEDs. There is a zoom of 8 to 63 degrees on the LEDs
and a strong central airfl ow that can be combined with fog and haze
to assist with creating the best quality atmospheric effects. The vari-
-speed fan can be independently DMX controlled… starting from a very
low RPM and is a perfect complement to fog and hazers in any 'live'
environment – from clubs to concerts – needing fi ne-tuned fog / haze
fl ows, from a mere wisp of smoke to a full-on immersive low cloud
coverage! Each LED is individually controlled and can be pixel mapped
for the creation of eye-catching colour, rainbow, strobe etc. effects.
The Cyclone is also perfect for lighting and cooling performers from
a neat 'footlights' position and can also produce dramatic 'hair-blowing'
and 'smoke-through-the-fan' effects.The unit also benefi ts from all the
features from Robe's massively popular LEDWash series.
Specifi cations
SOURCE
Light source: 24x 15 W RGBW LED multichips
Led Life Expectancy: Minimum 60.000 hours
Typical Lumen Maintenance: 70% @ 60.000 hours
OPTICAL SYSTEM AND EFFECTS
High effi cient component optics
Linear motorized zoom: 8°–63°
Fan: 5-bladed fan with controllable velocity starting from very low RPM
Strong airfl ow through fi xture head for best atmospheric effects
Perfect complement to fog and hazers
Features
High-Speed FAN
Individual control of each LED
True whites
Multichip LED technology
Zoom: 8°– 63°
Atmospheric Effects
Hair-blowing and smoke-through-the-fan effects
Suitable for stand-alone operation
Colour mixing: RGBW
LED control: Individual control of each RGBW pixel
CTO fi lter: 0–100%
Virtual colour wheel with pre-programmed: 237 colours including whites
(2.700 K, 3.200 K, 4.200 K, 5.600 K and 8.000 K)
Tungsten lamp effect: at whites 2.700 K and 3.200 K
(red shift and thermal delay during dimming)
Colour rainbow effect: Variable speed
Pre-programmed pixel effects: Colour, dimming and strobe chases,
waves and pulses at variable speed and directions
High resolution dimmer: 0–100%
Strobe effect: With variable speed, max. 20 fl ashes per second,
Individual zone strobe effects
Pre-programmed: Random strobe & pulse effects
CONTROL AND PROGRAMMING
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2
Wireless: Wireless CRMX™ technology from
Lumen Radio included as a standard accessory
Control channels: 16, 24, 96
Protocol modes: 3 DMX
Programs: 3-editable, each up to 100 steps
Stand-alone operation: Yes
Display: QVGA Robe touch screen with battery backup, gravitation sensor
for auto screen possitioning, operation memory service log with RTC
Pan/Tilt resolution: 8 or 16 bit
Movement control: Tracking and vector
R, G, B, W colours: 8 or 16 bit
Zoom: 8 or 16bit
Dimmer: 8 or 16bit
Ethernet port: Art-Net, MA Net, MA Net 2 protocols, ready for ACN
Data in/out: Locking 3-pin & 5-pin XLR
Power in: Neutrik PowerCon
Built-in analyser for easy fault fading
FAN SPECIFICATION
Fan diameter: 180 mm (7.1")
Max. power: 93 W
Airfl ow: 900 m
3
/h (530 CFM)
Noise level: 68 dB @ full speed
Max. speed: 4.550 RPM
MOVEMENT
Pan movement range: 450°
Tilt movement range: 300°
Movement resolution 16 bit
Automatic Pan/Tilt position correction: Yes
Built-in Pan/Tilt macros: Yes
THERMAL SPECIFICATION
Maximum ambient temperature: 45 °C (113 °F)
Maximum housing temperature: 75 °C (167 °F)
ELECTRICAL SPECIFICATION
Electronic auto-ranging
Input voltage: 100–240 V AC, 50–60 Hz
Power consumption: Max. power consumption
Compliance: cETLus, CE
Comentarios a estos manuales